Internal hinges & connection solutions
Standardized & specific concealed hinges for internal assemblies

A variety of applications require hinge solutions for functional or visual reasons, their attachment surfaces in the package itself, i. from the outside can not be visible or mounted without damage. For this purpose, we hold various variants of Verschwindscharnieren in our program, which is customizable both as a standard product as well as in special design to the respective installation and use situation.

Internal hinges are used in particular in the following applications:

  • Connections with high optical (design) requirement (smooth, trouble-free surfaces)

  • Connections with higher security requirements or special burglary protection

  • Connections with a high risk of corrosion (outdoor installation, special weather conditions, etc.)

  • Connections with installation restrictions

In the segment of internal hinges, we offer the following product ranges for your selection; All listed products in standard as well as extended standard are available for inquiry. As far as possible, we of course also adapt this assortment to individual installation environments:

Internal hinges // standard versions

Internal hinges // Special construction & extended standard 


⇒ Further innovative & internal kinematics solutions // SEPTOMAX multiple-joint hinges

Internal standard hinges
Standardized solutions as vanishing hinges & construction tapes

  • Concealed Hinge Type 783
  • For inset doors
  • With screwable adjustment
  • In steel-raw or galvanized
  • DATA SHEET
  • Concealed Hinge Type 126
  • For inset doors
  • Rolled unperforated version, with loose pin
  • In steel-raw with steel or brass pin
  • DATA SHEET
  • Concealed Hinge IL-1
  • For inset doors
  • Hinge bracket in one piece, pull-out pin
  • Parts natural and galvanized
  • DATA SHEET
  • Concealed Hinge IL-2
  • For overlying doors
  • Can be screwed to the frame, door part weldable, removable bolt
  • Parts natural and galvanized
  • DATA SHEET
  • Concealed Hinge IL-3
  • For overlying doors
  • Can be screwed to the frame, door part weldable, removable bolt
  • Parts natural and galvanized
  • DATA SHEET
  • Concealed Hinge IL-4
  • For overlying doors
  • Can be screwed to the frame, door part weldable, removable bolt
  • Parts natural and galvanized
  • DATA SHEET
  • Concealed Hinge IL-5
  • For overlying doors
  • Screw-on to the frame, weldable door latches, pull-out pin
  • Parts natural and galvanized
  • DATA SHEET
  • Concealed Hinge IL-6
  • For overlying doors
  • Screw-on to the frame, weldable door latches, pull-out pin
  • Parts natural and galvanized
  • DATA SHEET
  • Concealed Hinge IL-7
  • For inset doors
  • Removable bolt, usable on both sides
  • Parts natrublank and galvanized
  • DATA SHEET
  • Concealed Hinge IL-8
  • For inset doors
  • For spot welding, two-part hinged hanger, usable on both sides
  • Parts natural and galvanized
  • DATA SHEET
  • Concealed Hinge IL-9
  • For inset doors
  • Hinge clamp two-piece, with middle guide, usable on both sides
  • Parts natural and galvanized
  • DATA SHEET
  • Concealed Hinge IL-10
  • For inset doors
  • With fixed pin, weldable in frame, can be used on both sides
  • Parts natural and galvanized
  • DATA SHEET
  • Concealed Hinge IL-11
  • For inset doors
  • Split bracket, with welded sleeve, with washer and spring ring
  • Natural material / DIN parts galvanized
  • DATA SHEET
  • Concealed Hinge IL-12
  • For inset doors
  • Hinge bracket, one-piece, retractable angled bolt
  • Parts natural and galvanized
  • DATA SHEET
  • Concealed Hinge IL-13
  • For overlying doors
  • With loose pin and weld-on tabs, can be used on both sides
  • Parts natural and galvanized
  • DATA SHEET
  • Concealed Hinge IL-14
  • For overlying doors
  • For row cabinets, loose pin, usable on both sides
  • Parts natural and galvanized
  • DATA SHEET

Request product // modify?
Via ONLINE or PERSONAL

Alternatives? In the area of special hinges or design / end product solutions or multi-joint hinges

Interior special hinges & Extended standard solutions
Examples of specially designed concealed hinges (also available on request or customizable according to individual specifications)

  • Concealed Hinge IL-15
  • Hinge bracket 3-piece, with integrated stop
  • With round holes and slotted holes, flat-riveted
  • Material raw-galvanized or stainless steel
  • Detailed information on request
  • Concealed Hinge IL-16
  • Hinge 2-part, 4-times cranked
  • With offset hole pattern, detachable pin
  • Material naturally galvanized (or similar)
  • Detailed information on request
  • Concealed Hinge IL-17
  • Hinge bracket 2-piece, with slotted holes
  • with integrated spring / closure mechanism
  • Material natural-galvanized or powder-coated
  • Detailed information on request
  • Concealed Hinge IL-18
  • Hinge clamp 2-piece, double cranked
  • 5-part trade, with half-round rivet
  • Material natural, galvanized
  • Detailed information on request
  • Concealed Hinge IL-19
  • Hinge clamp 2-piece, 3-fold cranked
  • With round holes, rolled version
  • Material natural, galvanized or stainless steel
  • Detailed information on request
  • Concealed Hinge IL-20
  • Hinge 3-piece, with stop and thread
  • 3-part knuckle, profile design with oblong holes
  • Material natural, galvanized
  • Detailed information on request
  • Concealed Hinge IL-21
  • Hinge 2-piece, with welded mounting rods
  • Rolled version with staggered round holes
  • Material natural, galvanized
  • Detailed information on request
  • Concealed Hinge IL-22
  • 2-part hinge bow, double 90-degree offset
  • Rolled version with multiple countersunk holes
  • Material natural, galvanized or stainless steel
  • Detailed information on request
  • Concealed Hinge IL-23
  • Hinge bow 3-piece, various individual cranks
  • 3-part knuckles, with side mounting plate
  • Material natural, galvanized
  • Detailed information on request
  • Concealed Hinge IL-24
  • Hinge bow 2-part, 4-times cranked
  • Rolled version with round holes
  • Material natural, galvanized or stainless steel
  • Detailed information on request
  • Concealed Hinge IL-25
  • Hinge bow 2-part, with stiffening plate
  • With plastic locking system and tapered PCB
  • Material natural, galvanized or stainless steel
  • Detailed information on request
  • Concealed Hinge IL-26
  • Hinge bow 2-part, wide symmetrical cranks
  • Rolled version with 3-part knuckles and round holes
  • Material naturally galvanized or stainless steel, various coatings possible
  • Detailed information on request
  • Concealed Hinge IL-27
  • Hinge bow 2-piece, curved crank
  • Heavy profile design with stiffening plate
  • Natural or galvanized material
  • Detailed information on request
  • Concealed Hinge IL-28
  • Hinge bow 2-piece, rolled version
  • With small weld-on plate and weld-on nuts
  • Material natural, galvanized
  • Detailed information on request
  • Concealed Hinge IL-29
  • Hinge bow 3-piece, complex assembly with stop
  • Rolled version with individual crank and plate design
  • Material natural, galvanized or stainless steel
  • Detailed information on request
  • Concealed Hinge IL-30
  • Hinge clip 2-part, with Rendel pin
  • With round-perforated recess and oblong holes
  • Material naturally galvanized or black powdered
  • Detailed information on request
  • Concealed Hinge IL-31
  • Multi-joint hinge, for horizontal and vertical installation
  • Opening angle up to 180/270 degrees, various versions
  • Material steel, stainless steel or aluminum
  • Detailed information on request or at septomax.com
  • Concealed Hinge IL-32
  • Hinge bracket 4-piece, as excavation system
  • With PA bushing and double roller
  • Material naturally galvanized or stainless steel
  • Detailed information on request
  • Concealed Hinge IL-33
  • Hinge bracket 2-part, with angled connection
  • Rolled version with rendition pen, with special cranking
  • Material natural, galvanized
  • Detailed information on request
  • Concealed Hinge IL-34
  • Hinge bow 7-piece, with welded connection plate
  • SEPTOMAX multi-joint design, with integrated stop
  • Material stainless steel or aluminum
  • Detailed information on request or at septomax.com
  • Concealed Hinge IL-35
  • Hinge bow 2-piece
  • Black powdered version with special bend
  • Natural material with powder
  • Detailed information on request
  • Concealed Hinge IL-36
  • Hinge bow 2-piece, symmetrically cranked
  • Robust profile design, with slotted hole
  • Natural or galvanized material
  • Detailed information on request
  • Concealed Hinge IL-37
  • Hinge bow multi-part, as a parallel swivel system
  • 4-joint design with integrated gas spring
  • Material: stainless steel
  • Detailed information on request or at septomax.com
  • Concealed Hinge IL-38
  • Hinge bow 2-piece / adjustable
  • Console weldable / usable on both sides
  • Natural material / DIN parts galvanized
  • Concealed Hinge IL-39
  • Hinge bow 2-piece, with reinforcing beads
  • Rolled version, with welded stiffener
  • Material natural, galvanized
  • Detailed information on request
  • Concealed Hinge IL-40
  • Hinge bracket 2-piece, with PA bolt
  • Rolled version, with round plate and countersunk perforation
  • Material natural, galvanized or stainless steel
  • Detailed information on request
  • Concealed Hinge IL-41
  • 2-part hinged handle, with spring mechanism
  • With half-round head pin and countersunk / round holes
  • Material natural, galvanized
  • Detailed information on request
  • Concealed Hinge IL-42
  • Hinge bracket 2-piece, with various offset angles
  • With double-layered connection, various hole patterns
  • Material naturally galvanized or stainless steel
  • Detailed information on request
  • Concealed Hinge IL-43
  • Hinge clamp 2-part, round head riveting
  • Profile design with 7-piece trade
  • Natural or galvanized material
  • Detailed information on request
  • Concealed Hinge IL-44
  • Hinge bracket 2-piece, with leaf suspension
  • Specific rounding and riveting, with welded connection
  • Material natural, galvanized or stainless steel
  • Detailed information on request

Request product // modify?
Via ONLINE or PERSONAL

Alternatives? In the area of special hinges or design / end product solutions or multi-joint hinges